# Dock Assembly

Assemble the charging dock for your trackers.

Difficulty: easy · Time: 5 minutes

> Illustrated web version: https://docs.openpawlabs.com/projects/bb-lsm6dsv/3-dock-assembly

Assemble the Charging Dock.

## Tools

- Philips Screwdriver (#1) ×1

## Step 1: Gather Materials

- Grab all of the parts you need to build the Charging Dock

- **You will need:** 1 x Charging Dock Board 6 x M2 8mm Screws (Self Tapping), included in Kit 1 x Dock Case Top 1 x Dock Case Bottom

## Step 2: Put Charging PCB in Case

- Align the USB-C port with the notch on the case and push the charger board into the bottom of the Charging Dock case.

## Step 3: Put on Case Top

- Align the USB-C port cutouts and place the top of the Charging Dock case on top of the charger board.

## Step 4: Screw together

- Grab your Philips #1 Screwdriver

- Use 6 x M2 8mm screws to connect the Charging Dock case together

## Step 5: Dock Complete!

- You are done! Go ahead and place all of your trackers into the Charging Dock.