# Community Strap Assembly

Attach the tracker mounts to the 3rd party straps.

Difficulty: easy · Time: 5 minutes

> Illustrated web version: https://docs.openpawlabs.com/projects/bb-lsm6dsv/4-strap-assembly

Attach all of the tracker slide mounts onto your straps!

## Step 1: Gather Materials

- Grab your Straps and the Tracker Slide Mounts.

- If you do not have Straps you either need to buy 3rd party straps (recommended), or you need [to make your DIY Straps](https://docs.openpawlabs.com/projects/bb-lsm6dsv/diy-straps).

- We recommend you buy a set of straps from VYR0 VR or another community creator! Almost any pre-made straps should work just fine. The tracker mounts are designed to fit 30mm straps. Community strap recommendations:

- [($28) VYR0 VR Full Body Strap Set](https://vyrovr.com/products/10-elastic-full-body-tracker-straps)

- [($156) VYRO VR Comfort Strap Bundle](https://vyrovr.com/products/vyro-vr-comfort-strap-bundles?variant=45071132196943)

- [($17) Pixel Strap Bundle (Kit 7+3)](https://ko-fi.com/s/7acfefe9a7)

- [Venti Comfort Straps](https://ventifbt.store/products/venti-comfort-straps)

- [Venti Velco Straps](https://ventifbt.store/products/tracker-straps)

## Step 2: Open Strap

- Undo the velcro on the strap and grab one of the tracker mounts.

## Step 3: Attach Tracker Mount

- Thread the strap through each hole so that it is running along the back of the tracker mount.

- Attach the velcro back down to the strap

## Step 4: Repeat for all Straps

- Attach the tracker mounts to each strap

- You are done and ready to move on to setting up SlimeVR/VRChat!